|
PRODUCT
INFO |
J C Wilkins Ltd and RMC Readymix
RMC Readymix Supaflo.
Readymix Supaflo is a flowing floor screed based on alpha hemihydrate calcium
sulphate. It is ready to use and presents advantages over traditional screeds.
It is far less labour intensive and up to ten times the area may be laid with one gang of men as compared with alternative semidry screeds. In contrast to many traditional screeds, shrinkage and curling is most unlikely to occur. Any that does will be minimal. It may be laid at a lesser thickness than conventional semidry screeds.
It is used in all dry locations and applications where traditional screeds are laid and it provides an excellent surface finish.
HARDENING AND DRYING - Readymix Supaflo may be lightly trafficked after 1 to 2 days, depending on drying conditions.
CURING - Care should be taken to avoid excessive water loss in the first 24 hours.
If windows or external doors are not installed, temporary provision must be made with polythene or similar. Direct sun must also be avoided during early life.
ABRASION AND IMPACT - The material has good resistance to
abrasion and impact, when compared with traditional cement sand screeds. However,
screeds should not be treated as wearing surfaces and care should be taken
to protect against excessive impact.
